Animal Hunting Tips: How to Process and Store Animal Bones

Animal Hunting Tips: How to Process and Store Animal Bones

Are you an avid hunter looking for effective ways to process and store animal bones? Processing and storing animal bones correctly is essential to ensure their durability and usability in various applications. Whether you are an experienced hunter or new to the world of hunting, this article will provide you with valuable tips and techniques to optimize the process of processing and storing animal bones. By following our expert advice, you can enhance your hunting experience and make the most out of the bones you collect. Read on to discover the best practices for processing and storing animal bones effectively.

Preparing Animal Bones for Processing

Cleaning the Bones

Before you can start processing animal bones, it’s important to clean them thoroughly. Here are some steps to follow:

  1. Remove any visible dirt or debris from the bones by gently brushing them with a soft-bristle brush.
  2. Fill a large container or sink with warm water and add a small amount of mild dish soap.
  3. Place the bones in the soapy water and let them soak for about 30 minutes to loosen any remaining dirt.
  4. After soaking, scrub the bones again with the brush to remove any stubborn dirt or grime.
  5. Rinse the bones thoroughly under running water to remove any soap residue.

Removing Flesh and Tissue

Once the bones are clean, you need to remove any remaining flesh or tissue. Follow these steps:

  1. Wear gloves to protect your hands and use a sharp knife or scalpel to carefully cut away any visible flesh or tissue from the bones.
  2. For stubborn or hard-to-reach areas, you can use a small wire brush or toothbrush to gently scrub the bones.
  3. Be patient and thorough in this process to ensure all flesh and tissue is removed.

Boiling the Bones

Boiling the bones is an essential step to sanitize them and prepare them for storage or further processing. Here’s what you need to do:

  1. Fill a large pot with enough water to completely submerge the bones.
  2. Add a tablespoon of dish soap or a small amount of bleach to the water to help disinfect the bones.
  3. Place the bones in the pot and bring the water to a boil.
  4. Once the water is boiling, reduce the heat to a simmer and let the bones cook for about 1-2 hours.
  5. Periodically check the pot and skim off any foam or impurities that rise to the surface.
  6. After boiling, carefully remove the bones from the pot and rinse them with clean water.
  7. Allow the bones to air dry completely before moving on to processing or storage.

By following these steps, you can properly prepare animal bones for processing. Remember to always prioritize safety and hygiene during the entire process.

Processing Animal Bones

Drying the Bones

Drying animal bones is an essential step in the process of preserving and storing them. By removing moisture from the bones, you can prevent decay and ensure their longevity. Here are some tips on how to effectively dry animal bones:

  1. Cleaning the bones: Before drying, it is important to clean the bones thoroughly. Remove any flesh, feathers, or fur attached to the bones. You can use a knife or a toothbrush to gently scrape off any remaining tissue.

  2. Air drying: The simplest method of drying bones is through air drying. Place the cleaned bones in a well-ventilated area, preferably outdoors. Avoid direct sunlight as it can cause discoloration. Allow the bones to air dry completely, which may take several weeks depending on the size and thickness of the bones.

  3. Using desiccants: To speed up the drying process, you can use desiccants such as silica gel or kitty litter. These materials absorb moisture from the surrounding environment, helping to dry the bones more quickly. Place the bones in a container and bury them in the desiccant. Check the bones regularly and replace the desiccant as needed until the bones are fully dried.

Whitening the Bones

Whitening animal bones not only enhances their appearance but also helps to remove any remaining stains or discoloration. Here are some methods to whiten bones effectively:

  1. Hydrogen peroxide: One common method to whiten bones is by using hydrogen peroxide. Dilute hydrogen peroxide with water in a 50:50 ratio and immerse the bones in the solution. Allow the bones to soak for several hours or overnight. Rinse the bones thoroughly with water and let them air dry. Repeat the process if necessary until the desired whiteness is achieved.

  2. Bleaching powder: Bleaching powder, also known as calcium hypochlorite, can be used to whiten bones. Create a solution by mixing bleaching powder with water according to the instructions on the packaging. Submerge the bones in the solution and leave them for a few hours. Rinse the bones with clean water and allow them to air dry. Be cautious when handling bleaching powder and follow safety precautions.

Cutting and Shaping Bones

Once the bones are dried and whitened, you may want to cut and shape them for various purposes such as crafting or display. Here are some guidelines for cutting and shaping animal bones:

  1. Safety precautions: When working with bones, it is essential to wear protective gloves and safety glasses to prevent injuries. Bones can be brittle and may splinter, so take necessary precautions to avoid accidents.

  2. Cutting tools: Use sharp and sturdy cutting tools such as a hacksaw or a Dremel rotary tool with a cutting wheel attachment. These tools will allow you to make precise cuts on the bones. Start with light pressure and gradually increase it as needed.

  3. Shaping techniques: Depending on your desired outcome, you can shape the bones by cutting, sanding, or grinding. For intricate shapes, use a small file or sandpaper to refine the edges. Take your time and work slowly to achieve the desired shape without damaging the bones.

Remember to always follow local laws and regulations regarding the harvesting and possession of animal bones. Properly processed and stored animal bones can be fascinating and educational artifacts, whether for personal use or as part of a collection.

Storing Animal Bones

When it comes to animal hunting, processing and storing the bones properly is essential to make the most out of your hunting experience. Storing animal bones requires careful consideration to ensure their preservation and organization. In this article, we will discuss the different aspects of storing animal bones and provide useful tips to help you make the right choices.

Choosing the Right Storage Method

Selecting the appropriate storage method for your animal bones is crucial to maintain their quality and prevent any damage or deterioration. Here are a few options to consider:

  • Cool, Dry Environment: Finding a cool and dry place is essential to prevent the growth of mold or bacteria on the bones. A basement or a well-ventilated room can be suitable options for storing animal bones.

  • Airtight Containers: Utilizing airtight containers is a great way to protect the bones from insects, moisture, and dust. Plastic bins or sealable bags can be used to store smaller bones, while larger bones may require sturdy plastic containers or boxes.

  • Freezing: If you have limited storage space or plan to store the bones for an extended period, freezing can be an effective method. Wrap the bones tightly in plastic wrap or place them in freezer-safe bags before putting them in the freezer. Remember to label the bones for easy identification.

Organizing and Labeling Bones

Proper organization and labeling of your stored animal bones will save you time and effort when you need to access or identify specific bones. Here are some tips for organizing and labeling:

  • Categorize by Species or Animal Type: Separate the bones based on the species or animal type to ensure easy retrieval when needed. This categorization will also help you maintain a clear inventory of your collection.

  • Use Clear Containers or Bags: Transparent containers or bags allow you to see the bones without opening them, saving you from potential damage or unnecessary handling. Clear labeling should accompany each container or bag.

  • Create a Detailed Inventory: Keep a record or inventory of the bones you store, including information such as species, date of collection, and any other relevant details. This inventory will assist you in keeping track of your collection and facilitate future reference.

Preserving Bones for Long-Term Storage

If you intend to store animal bones for a longer duration, taking additional measures to preserve their quality is essential. Here are some methods to consider:

  • Cleaning and Degreasing: Thoroughly clean and degrease the bones before storing them to avoid any foul odor or potential decay. Soaking the bones in a mixture of water and mild detergent can help remove dirt and grease effectively.

  • Using Desiccants: Placing desiccants, such as silica gel or activated charcoal, in the storage containers can absorb excess moisture and prevent the growth of mold. Regularly check and replace the desiccants if necessary.

  • Avoid Direct Sunlight: Exposure to direct sunlight can cause discoloration and deterioration of the bones over time. Ensure your storage area is away from windows or use opaque containers to shield the bones from harmful UV rays.

By following these tips on choosing the right storage method, organizing and labeling bones, and preserving them for long-term storage, you can ensure the longevity and quality of your animal bone collection. Proper storage techniques will not only protect the bones but also allow you to appreciate and study them for years to come.


In conclusion, learning how to process and store animal bones is essential for any hunting enthusiast. By following the tips and techniques discussed in this article, hunters can ensure that no part of the animal goes to waste. Properly processing and storing animal bones not only allows for the creation of useful tools and crafts but also promotes sustainability and respect for the animals we hunt. So, the next time you embark on a hunting expedition, remember to utilize these hunting tips and make the most out of the animal bones you acquire.